By David Kitchenham Sunday, 21st February 2021 0 Comments Wera 2go Helps us to get Organised Systems, Systems… Regular users of Wera tools will know that the brand is well known for its systemisation. The tools are cunningly designed to work together to help users solve fixing and driving conundrums, as well as helping users like me maintain some semblance of organisation. Wera does this with careful tool presentation in wallets etc, and by making tool identification as easy as possible. But most trades will identify with the following problem – even though all your tools may be organised into neat rolls and wallets in a toolbox, we don’t want to carry the whole box to the work point. So we do the next best thing – take a couple of handfuls of wallets and tool rolls and hope that there aren’t any unforeseen tool needs that come up. Get the Wera 2Go Set But wouldn’t it be good to have a quick method of carrying the tools – perhaps gathered from the workshop as well as the van – in a way that keeps them all organised, together and in an easy-to-carry (including up a ladder) format? As ever, Wera designers have got there before us with the launch of the new 2go System, and regular Wera users will recognise on the 2go the wide use of hook and loop fixings and strong black nylon cases. I was sent several items of 2go, and even just unpacking the boxes and trying out various permutations I could start to appreciate just how clever 2go is. Aimed at: Wera fans who will relish the organisational possibilities of the kitPros: Solidly made, flexible usage built in and usual great Wera design. Good news for retailers is that Wera has continued to develop the use of its high-quality, distinctive packaging. This sends all the right messages of quality and desirability that make for better sales and pride of ownership. All the pieces I was sent had the distinctive matt black packaging with slick modern logos, clear illustrations of the contents and an animation of how it could be used, so potential customers could be clear on what to buy and how to use its features to their optimum capacity. I will start with what I think is the basic piece, the 2go 1. This looks like a little black evening bag on first glance, but it is in fact a semi-rigid piece of strong black nylon fabric folded in the middle with four faces. Inside and out it is covered with big patches of hook and loop material. Over the fold there is a loop handle sewn in, but to this can be attached an adjustable shoulder strap. The strap has a padded middle section (with the distinctive Wera logo on it) for easy carrying. In this form the 2go 1 is a blank canvas onto which many other things can be easily attached and then carried to the worksite in a convenient and organised way. Users who already have other Wera tools, like the rigid-walleted Zyklop and socket sets, will be able to attach these to the 2go 1 (on both sides) since they have the necessary hook and loop strips on them. I did try to attach as many of these wallets as I could – and it will carry a surprising amount of stuff – but the advice is don’t exceed 15kgs. Frankly, more than enough tools for one shoulder. The most distinctive part of the 2go set in my view is the 2go 2. It consists of three pieces – the shoulder strap, the tool caddy pouch and the big rigid box – like a tool case. This case is 35cm wide, 34cm tall and 11cm deep, so is spacious enough to hold a good deal. But after a close examination I came to appreciate how versatility has been designed in. For example, in order to allow as much flexibility to attach smaller wallets, the outside – the front, back and sides – has hook and loop material attached to it. The front panel can also be folded down for easy access to the tools inside – and then the folded panel also has hook and loop attached. This increases the user’s ability to attach the wallets needed, as well as being able to work from the open case. A similar arrangement on the lid, which can be folded right back flat, means that wallets can be attached here too. The fact that the case has a big, flat base to enable it to stand upright on an even surface is also really helpful. It wouldn’t be out of place to carry a small cordless drill driver and spare battery in the spacious main body of the case, but the third part of the 2go 2 comes into its own here. This is a tool caddy with adjustable compartments and its own nylon handle that is perfect for carrying the myriad of different screwdrivers we need to have with us these days.Since the screwdrivers can be arranged handle-up, we can take advantage of the fact that Wera drivers can be identified easily by the engraved marks on the top of the handles and their new Tool Finder colour code system, thus saving time and hassle. The big, padded, adjustable shoulder strap has strong nylon lock-on clips that attach it to the tool case so that it can be carried easily, or even taken up a ladder to the work point. The last piece of the set is the 2go 3. This is simply a large rigid wallet about 32cm long, 14cm high and 8cm deep with its own small carry handle sewn in. It is a great ‘hold all’ for spanners, pliers, cutters and even a small hammer. We all need a case like this for ‘unclassified’ or loose tools that are needed but don’t have to be organised into a set. A wide strip of hook and loop on the back of the case means that it is equally at home attached to the 2go 2 or the 2go 1, or attached to a space in the van or workshop. There will surely be the naysayers who defy organisation and the 2go concept, but increasingly I see people onsite who have embraced organisation because they see that it saves time and bother. Time spent looking for tools is wasted time and clients don’t like it. The sheer flexibility of the 2go sets will allow users to customise their tools for particular jobs as well as minimising the need to lug a huge toolbox to the work point. Wera Tool Rebels won’t need convincing – they probably helped suggest the idea in the first place! Post navigation Previous Post How Much Health and Safety is Too Much? Next Post Do you know the Dangers of Dust – The Devil is in the Detail David Kitchenham Tool loving geek and tech head from PAL Media. Leave a Comment Cancel replyYou must be logged in to post a comment.